Coester - a two-component injection fluid based on Mautrol 2K silicates and esters
Price on request
discount price
net unit price
32,99zł for kg
minimum trading quantity
the amount of product
39.50 kg
total price
net list price
1 560,25zł
for 39.50 kg
total price
discounted net price
1 303,11zł
for 39.50 kg
price-list
gross unit price 48,59zł
for kg
discount price
gross unit price
40,58zł
for kg
minimum trading quantity
the amount of product
39.50 kg
total price
gross list price
1 919,11zł
for 39.50 kg
total price
gross discount price
1 602,82zł
for 39.50 kg
Product description
Initial, two-component fluid based on silicate and ester, used to make a horizontal diaphragm. This is to cut off capillary pull-up moisture. The product narrows the capillaries and has a hydrophobic effect. It can be used by low-pressure injection, also in walls with significant moisture. The preparation is characterized by a high content of active substances.
Properties
- two-component injection fluid
- low viscosity
- based on silicate and ester w
- shows the gelling effect of component B, thanks to which it can also be used in highly damp parts of the building without the need to dry them first
- material effective even when the walls are moist with tendons up to 95% - has been tested according to the WTA 4-4-04 / D instructions
- apart from restoring horizontal insulation, Koester Mautrol 2K increases the strength of concrete and masonry substrates and provides additional protection against the penetration of aggressive substances
- does not cause corrosion of the reinforcement
Application
- low-pressure injection performed to restore horizontal insulation against capillary-rise moisture in walls with moisture up to 95%
- can be used in masonry or concrete walls, as well as to strengthen masonry walls made of natural stone or brick
- inside and out
- it can also be used only to increase the strength of the wall
- for making horizontal diaphragms in walls against capillary rising moisture in accordance with the WTA 4-4-04 / D instruction, above the water damming level
Technical data
- material base silicates / silicates esters
- color milky white, transparent
- density: component A 1.16 g / cm 3 ; component B 1.09 g / cm 3
- density after mixing 1.15 g / cm 3
- initial viscosity approx. 30 mPa s
- open time approx. 30-60 min (depending on the temperature)
- consumption about 0.12 kg / m per 1 cm of wall thickness
- mixing ratio (by weight) A 100 parts: B 9 parts
- mixing ratio (by volume) A 100 volume units: B 9.4 volume units
Technical data