Ceresit CN 76 mortar is intended for direct pouring onto concrete feet or substrates. It can be used for utility floors or floor layers, e.g. made of ceramic tiles. The material can be used inside and outside buildings. Floors made of CN 76 thickness from 6 to 50 mm are resistant to high mechanical loads and abrasion. They can be used in production halls, warehouses, workshops, garages, on loading ramps. Additionally, they can be painted with concrete floor paints, eg Ceresit CF 34, or CF 37 resin floors can be applied to them. CN 76 mortar mixed with less water has a plastic consistency and can be used to form slopes. When a CN 76 layer thickness of 15 to 50 mm is needed, then aggregate with a grain size of 0 8 mm, in accordance with PN-86 / B-06712, should be added to the mortar.

Technical data

• compressive strength (according to PN-EN 13813): C35
• bending strength (according to PN-EN 13813): F7
• shrinkage (according to PN-EN 13813): 1.15 mm / m
• abrasion on the Bohme shield (according to PN-EN 13813): A6
• consistency (according to PN-EN 13813): 105
• release of volatile substances: according to PN-89 / Z-0421/02
• the product has the required documents allowing use.

attention

Xi, Irritant. Irritating to eyes, respiratory system and skin. May cause sensitization by skin contact. Risk of serious damage to eyes.